Magnetbrytare 15A
Magnetbrytare 15AFörstora bild
Magnetbrytare 15A
General purpose magnetic power switch. Small and incredible strong.
 
6st

Introduction

This is a general purpose switch designed for remote controlled equipment. The switch is very small and incredible strong. With this switch your equipment or model can be turned on or off without your need to access it internally. Just move a magnet over the switch, on the outside, and it turns on. To turn it off just pass the magnet by the switch again. The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a 300mAh battery for several years without discharging it. The switch has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc. There are also many other things it can be used for such as rc submarine, diving lights, immobilizer for motorcycles and cars. etc.

Technical Data

Input voltage range: 3.5v~13v
Ultra low dropout voltage: 62mV@20A
Output current constant: 15A @ +25C ambient temperature
Output current burst: >30A
Ultra low stand-by current: 5µA (micro-ampere)
Wire: high-quality 1.5mm2 / AWG 15
Weight including cables: 7.6 grams / 0.28oz.
Length including cables: 17 cm / 7 in
Dimensions: 25 x 8 x 5 mm / 0.98 x 0.31 x 0.20 in
Operational temperature range: -40C to +85C


Tillbaka