KST X08N 8mm 8g 2.8kg 0.09s
KST X08N 8mm 8g 2.8kg 0.09sFörstora bild
KST X08N 8mm 8g 2.8kg 0.09s

 
0st
Pris:419 kr

KST X08N HV Lugless Servo - 8mm 8g 2.8Kg.cm

The KST X08N is a version of the KST X08 servo without mounting lugs (also called mounting tabs). It is especially good for ailerons on DLGs, electric racers, and all models with thin flying surfaces. The gearing has been optimised to improve the torque while keeping an excellent speed. The X08-N can be operated from a voltage as low as 3.8V (1S LiPo) or as high as 8.4V (2S LiPo). KST improved its geartrain machining tolerances, and this servo is completely slop free, and equal to products costing twice as much. Despite not having an -MG moniker this servo has metal gears, and is very tough.

The KST X08N's high torque, good speed, and 8mm thinness make it suitable for many high performance glider, pylon racers and EDF applications. With up to 2.8kg.cm torque the KST X08 is appropriate for F3K, F5D, F5J, many types of high performance models.

The V3 version has improved electronics and a better supported servo cable. The servo output arms are all different, with one designed for DLGs with a reduced vertical height.

The extreme reliability and performance of these servos also makes them very suitable for use in film and motion picture industry special effect, robotic, drone, UAV, UAS, academic research, military, and other highly demanding applications.


KST X08-N Specifications
Body dimensions 23.5 mm wide x 8.0 mm thick x 16.8 mm high
Max dimensions 23.5 mm wide x 8.0 mm thick x 25.0 mm high
Stall torque (3.8V) 1.40 kg.cm
Stall torque (6V) 2.20 kg.cm
Stall torque (8.4V) 2.80 kg.cm
Weight 8.3 g
Lead length 10 cm
Operating speed (3.8V) 0.18 sec/60°
Operating speed (6V) 0.15 sec/60°
Operating speed (8.4V) 0.09 sec/60°
Operating voltage 3.8V to 8.4V
Bearings 2 ball bearings
Gear material Aluminium alloy / copper-bronze alloy
Case material Aluminium alloy
Motor type Coreless DC motor
Working frequency 333 Hz
Driver type FET
Digital Yes
Programmable No
Supplied accessories 3 plastic output arms, 1 arm retaining screw, 4 mounting screws

Tillbaka