MKS DS6125H
MKS DS6125HFörstora bild
MKS DS6125H

 
4st
Pris:725 kr

MKS DS 6125H med fästöron för stående montering.

Hölje helt i aluminium, dubbla kullager och Crome-Titan metalldrev.

Mått:                    30 x 10 x 28,7 mm

Vikt:                     24,33 gram

Arbetsspänning:    4,8 V Obs !!

Moment:               4,2 kg-cm

Hastighet:             0,12 s

Tillbehör finns såsom korta och långa metallarmar och SBEC kretsar.

DS6125H Specifications

Dead Band: 0.001ms (Default)
Control System: +Pulse Width Control
Working frequence: 1520µs / 333hz
(RX) Required Pulse: 3.0 ~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 ~5.5 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.12 sec/60° degrees at no load
Operating Speed (6.0V): 0.10 sec/60° degrees at no load
Stall Torque (4.8V): 4.2 kg.cm (38.9 oz/in)
Stall Torque (6.0V): 5.2 kg.cm (48.6 oz/in)
360° Modifiable: YES
Motor Type: DC Motor
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Chrome-Titanium Gears
Programmable: NO
Connector Wire Length: 15.0 cm (5.89 in)
Dimensions: 30x10x28.7 mm
Weight: 24.33g
Destruction properties: In the 18 ~ 22 kg-cm moment of impact more than three times, the gear will start to slip (push pull at this time there are 3 ~ 5kg/cm); 23 kg-cm instant hit, Gears of collapse.

Tillbaka